TK Products Kennel Single Side Panels

TK Products Pro-Series Kennel Single Panels allow customization for any heavy-duty multi-run kennel - indoors or outdoors

Two side panels are needed to help support Door Panels and End Panels. The inside of the frame is pre-drilled around the entire inner perimeter; then each end of the wire mesh is inserted into the pre-drilled frame and welded around every wire. All Side panels are raised off the ground with a 2” leg for easy spray cleaning and have a plastic leg insert to help with wear and corrosion resistance. 

TK square frame kennels are bolted together using a stainless steel bolt assembly that is designed to wrap around each frame for increased strength, unlike round tube framed kennels that use a round clamp system which often become loose and rotate. Their bolt assembly includes all stainless steel bolts and vibration proof stainless steel locknuts. They chose this design due to their own experience with brackets that loosen and fail.

The square tubing frame holds 6 gauge 2x4 welded wire mesh. The inside of the frame is pre-drilled around the inner perimeter; then each end of the wire mesh is inserted into the pre-drilled frame and welded around every wire. This is the most secure way to fasten the wire mesh to the frame and eliminates exposed sharp or jagged edges that could injure your pet. This design also provides a quiet kennel with no rattling of the fence like other chain link versions. Most other brands just weld the wire mesh to the surface of the frame every six to twelve inches which means some of the wire mesh ends can be bent out and injure your pet.

The kennels are raised off the ground with a 2” leg for easy spray cleaning and also have a plastic leg insert to help with wear and improve corrosion resistance.

Actual dimensions:

• 4'L x 6'H: 48″L x 72″H
• 5'L x 6'H: 60″L x 72″H
• 6'L x 6'H: 72″L x 72″H
• 8'L x 6'H: 96″L x 72″H
• 10'L x 6'H: 120″L x 72″H