Assembling Your Rhino Dog Kennel
Tools needed: 9/16 Wrench
Stand up the gate panel and open the door outwards so that the panel will stand on its own as shown in Figure A
Attach each side panel to the outside of the gate panel at the top and the bottom of the panel using the 1-5/8” panel clamps provided. One set of clamps are to be used per cutout on the panels. (Figure B)
Attach the back panel to the side panels with the 1-5/8” clamps in the same manner as the other panels. Tighten all bolts and make sure clamps are secure.